SW Series - Swiss Turning
7-Axis | Series includes SW-12, SW-20, SW-32 and SW-42
With leading technology and high-quality components, the Goodway SW series Swiss Turning Center provides standard 7-axis control with 4-axis coordinate motion which is high performing using high-speed built-in spindle*1, complete tooling system and flexible design of hybrid guide bush. The SW series offers turning, milling, drilling, tapping and other complicated work requirements for micro and precise parts.
Due these above advantages, the SW series is highly suited for the automobile, electronic, clock / watch, medical industry and other related industries. Specifically, the Goodway SW-12 ultra-performance Swiss Turning Center design concept is based on compact machine size and combined with complete tooling system, hybrid guide bush and rapid feed rate, to provide high speed, high accuracy and complicated processing capability.
SW - 12
SW - 20
SW - 42
The capacity of machines in this series fall in the following ranges:
-
Max machining diameter: up to 1.65”
-
Max turning length chuck/guide bushing: 5.5”/1.18” to 7.08”/4.33”
-
Cross live tooling: ER11 to ER20
-
Spindle motor output: 3/5 HP to 7/10 HP
-
Maximum spindle RPM: 10,000 RPM to 6,000 RPM
-
Max sub-spindle speed: 10,000 RPM to 6,000 RPM
SD Series - Swiss Turning
5-Axis | Series includes: SD-16, SD-20
With leading technology and high -quality components, the Goodway SD series Swiss turning Center provides high-speed turning, milling, drilling, tapping and other complicated work requirements on front / side of workpiece. Optional sub-spindle and rear-end tools available. The high-efficiency performance of SD series can satisfy with mass production of precision parts requirement.
The capacity of machines in this series fall in the following ranges:
-
Max machining diameter: up to 0.78”
-
Max turning length chuck/guide bushing: 6.88”and 5.5”
-
Cross live tooling: ER11 to ER16
-
Spindle motor output: 3/5 HP
-
Maximum spindle RPM: 10,000 RPM
-
Max sub-spindle speed: 8,000 to 10,000 RPM
SWII Series - Swiss Turning
9-Axis | Series includes SW-20II and SW-32II
Boasting innovative mechanical structure, plentiful tooling system and flexible hybrid guide bush design, the SW-II series can achieve unprecedented rigidity and productivity. The SW-II can handle the most complicated workpiece with short cycle times that will satisfy your processing requirements now and into the future.
The capacity of machines in this series fall in the following ranges:
-
Max machining diameter: up to 1.25”
-
Max turning length chuck/guide bushing: 8.66” to 12.4”
-
Cross live tooling: ER16 to ER20
-
Spindle motor output: 3/5 HP
-
Maximum spindle RPM: 10,000 RPM to 7,000 RPM
-
Max sub-spindle speed: 8,000 RPM